This page includes the recommended products based on your Osmo Recommends selection. If more than two products have been recommended, they will be displayed across multiple pages (2 per page).
This page includes information about regular cleaning, occasional maintenance, and recoating of your project which has been finished with Osmo.
This page includes additional products such as tools, accessories and cleaner, where applicable, to assist you with the application, cleaning, and maintenance of your project.
This page includes your Osmo Recommends selections such as wood type, requirements and more. For additional product and buying advice, reference this page along with your recommendations within this document in your nearest Osmo Supplier store, or show to a member of the Osmo Team.
Osmo UK is one of the leading producers and providers of modern wood products for both interior and exterior applications in both domestic and commercial environments.
Osmo Recommends is an online product recommendation tool for your project.
Follow the multiple choice options to find the best Osmo product recommendation and advice direct from our expert team!
Apply two thin coats using a roller or brush.
Please always trial apply!
Damp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain.
Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.
Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water.
For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils, use Osmo Liquid Wax Cleaner.
Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood's grain and natural characteristics
Attributes:Highest quality and easy to use finish
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
View Rapid
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil Rapid are highly repellent and easy to maintain.
Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner.
Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water.
For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx-Oils use Osmo Liquid Wax Cleaner.
Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood's grain and natural characteristics
Attributes:Quick drying finish
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
For surfaces treated with the 3088 (R9) finish, apply a thin, lint free cloth coat of Osmo anti-slip Maintenance Oil 3098 (R9) to the clean and dry surface.
Simply re-apply one thin coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood's grain and natural characteristics
Attributes:Anti-slip safety finish
Recommendation:See above for products and advice
Apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood's grain and natural characteristics
Attributes:Solvent/VOC free finish
Recommendation:See above for products and advice
For Lighter Coloured Woods Only!
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
View ProductFor Lighter Coloured Woods Only!
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
View ProductPlease Note: This product should only be used by experienced users of Osmo products. The Rapid version of 3044 Raw is only available in store from an Osmo Supplier that has a Tinting System.
Tinting SystemDamp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
If the oiled surface remains light in colour yet there is a reduction in water repellency, refresh the surface with Osmo Maintenance Oil 3079 Clear Matt. Before using Osmo Maintenance Oil 3079, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil 3079 can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear become visible, and providing the surface does not become completely bare, simply re-apply one thin coat onto the clean and dry surface. Avoid applying Polyx®-Oil Effect Raw to bare wood surfaces that have become dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to preserve the wood’s natural light colour
Recommendation:See above for products and advice
Apply two thin coats of 3040 White using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemApply two thin coats using a roller or brush.
Please always trial apply!
View RapidPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For spot cleaning stubborn scuff marks, or occasionally refreshing use Osmo Liquid Wax Cleaner 3087 White. Alternatively, Osmo Maintenance Oil 3440 White. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Light white tone
Recommendation:See above for products and advice
Apply one thin coat of 3111 White using a roller or brush.
Please always trial apply!
View ProductApply one thin top coat of 3040 White using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For spot cleaning stubborn scuff marks, or occasionally refreshing use Osmo Liquid Wax Cleaner 3087 White. Alternatively, Osmo Maintenance Oil 3440 White. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Mid white tone
Recommendation:See above for products and advice
For the first coat/s, apply 1-2 thin coats of Oil Stain 3501 White to achieve your desired intensity using a brush or roller, and rub into the wood with a white pad.
For the second top coat, apply 1 coat of Polyx-Oil Tints 3040 White in a Satin finish.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Apply one thin top coat of 3040 White in a satin finish using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing use Osmo Liquid Wax Cleaner 3087 White. Alternatively, Osmo Maintenance Oil 3440 White. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Intensive white tone
Recommendation:See above for products and advice
Two thin coats of the same colour can be applied using a roller or brush. However, for best results it is recommended to apply one coat of colour, followed by a clear coating of Polyx-Oil.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemApply two thin coats using a roller or brush.
Please always trial apply!
View RapidPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A lightly tinted colour
Recommendation:See above for products and advice
Choose from an endless selection of colours. Apply the first coat thinly using a brush or roller.
Please always trial apply!
View ProductApply the second clear coat thinly using a brush or roller.
Please always trial apply!
View ProductChoose from a selection of colours. For the first coating, apply thinly using a brush or roller, and rub into the wood with a white pad. An additional coat using the same method can be applied for a more intensive colour, if desired.
For the final coating, apply thinly one coat of Polyx-Oil Original 3032 Clear Satin, for best results.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Apply the second clear coat thinly using a brush or roller.
Please always trial apply!
View ProductPlease Note: This product is available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemOnly apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:An intensive colour
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Damp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:No preference, I just want the best protection possible!
Recommendation:See above for products and advice
Always apply thinly to this wood type!
Apply two clear coats thinly using a roller or brush.
Please always trial apply!
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive spot cleaning of scuff marks and refreshing using Osmo Liquid Wax Cleaner.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
For the first coat, apply 1 coat of Oil Stain (with 6631 Hardener) very thinly using a brush or roller, and rub into the wood with a white pad.
For the second top coat, apply Polyx-Oil Express 3332 Clear Satin (with 6632 Hardener) for best results.
Please always trial apply!
4 hours with 6631 Hardener
View Oil StainView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
For the second top coat, apply Polyx-Oil Express 3332 Clear Satin (with 6632 Hardener) using a brush or roller for best results.
Please always trial apply!
1-2 hours with 6632 Hardener
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency, use Osmo Maintenance Oil (not applicable for surfaces finished with Osmo 2K Wood Oil). This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Requirement:A colour that will protect the wood
Recommendation:See above for products and advice
It is mandatory that you always apply thinly to this wood type!
Apply two thin coats using a roller or brush.
Please always trial apply!
View ProductDamp mop floors using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
For more information and expert advice on the best product to use for your project, contact the Osmo Technical Team today.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Flooring
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
For the intensive cleaning of stubborn scuff marks, and refreshing the sheen on Osmo Door-Oil 3060 Clear Satin, use clear Osmo Liquid Wax Cleaner. Avoid using Liquid Wax Cleaner over Osmo Door-Oil 3033 Raw Matt as it will appear more shiny.
Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics / No preference, I just want the best protection possible!
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
For the intensive cleaning of stubborn scuff marks, and refreshing the sheen on Osmo Door-Oil 3060 Clear Satin, use clear Osmo Liquid Wax Cleaner. Avoid using Liquid Wax Cleaner over Osmo Door-Oil 3033 Raw Matt as it will appear more shiny.
Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to preserve the wood’s natural light colour
Recommendation:See above for products and advice
Choose from a selection of transparent colours from the Wood Wax Finish range. Apply the first coat thinly using a roller or brush for best results.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A transparent colour tone that allows the wood grain to remain visible
Recommendation:See above for products and advice
Choose from a selection of intensive colours from the Wood Wax Finish range. Apply the first coat thinly using a roller or brush for best results.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:An intensive colour
Recommendation:See above for products and advice
Recommended for light coloured wood species only. UV-resistance for interior use is not possible with dark-coloured wood species.
Apply two coats thinly using a brush or using a spray coating method.
Please always trial apply!
Please note, durability is stronger when applyingOsmo Door-Oil.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A UV-resistant finish
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Please check compatibilty with manufacturer of veneered doors before using!
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive spot cleaning of scuff marks and refreshing using Osmo Liquid Wax Cleaner.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Recommendation:See above for products and advice
MUST APPLY THINLY!
Apply two coats using a roller or brush.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
For the intensive cleaning of stubborn scuff marks, and refreshing the sheen on Osmo Door-Oil 3060 Clear Satin, use clear Osmo Liquid Wax Cleaner. Avoid using Liquid Wax Cleaner over Osmo Door-Oil 3033 Raw Matt as it will appear more shiny.
Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A finish to enhance the wood’s grain and natural characteristics / No preference, I just want the best protection possible!
Recommendation:See above for products and advice
MUST APPLY THINLY!
Choose from a selection of transparent colours from the Wood Wax Finish range. Apply the first coat thinly using a roller or brush for best results.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A colour that will protect the wood
Colour:A transparent colour tone that allows the wood grain to remain visible
Recommendation:See above for products and advice
MUST APPLY THINLY!
Choose from a selection of intensive colours from the Wood Wax Finish range. Apply the first coat thinly using a roller or brush for best results.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A colour that will protect the wood
Colour:An intensive colour
Recommendation:See above for products and advice
Recommended for light coloured wood species only. UV-resistance for interior use is not possible with dark-coloured wood species.
Apply two coats thinly using a brush or using a spray coating method.
Please always trial apply!
Please note, durability is stronger when applyingOsmo Door-Oil.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning with Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Doors
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A UV-resistant finish
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Attribute:Highest quality and easy to use finish
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
View RapidApply two thin coats using a roller or brush.
Please always trial apply!
View ExpressThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Attribute:Quick drying finish
Recommendation:See above for products and advice
Apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Attribute:Solvent/VOC free finish
Recommendation:See above for products and advice
For Lighter Coloured Woods Only!
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
View ProductFor Lighter Coloured Woods Only!
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
View ProductPlease Note: This product should only be used by experienced users of Osmo products. The Rapid version of 3044 Raw is only available in store from an Osmo Supplier that has a Tinting System.
Tinting SystemHighly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to preserve the wood’s natural light colour
Recommendation:See above for products and advice
Apply two thin coats of 3040 White using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemApply two thin coats using a roller or brush.
Please always trial apply!
View RapidPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemHighly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing use Osmo Liquid Wax Cleaner 3087 White. Alternatively, Osmo Maintenance Oil 3440 White. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Light white tone
Recommendation:See above for products and advice
Apply one thin coat of 3111 White using a roller or brush.
Please always trial apply!
View ProductApply one thin top coat of 3040 White using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemHighly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil Rapid are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing use Osmo Liquid Wax Cleaner 3087 White. Alternatively, Osmo Maintenance Oil 3440 White. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Mid white tone
Recommendation:See above for products and advice
Apply two thin coats of 3111 White using a roller or brush.
Please always trial apply!
View ProductApply two thin coats of Oil Stain 3501 White using a brush or roller, and rub into the wood with a white pad.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
For spot cleaning stubborn scuff marks, or occasionally refreshing use Osmo Liquid Wax Cleaner 3087 White. Alternatively, Osmo Maintenance Oil 3440 White. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Intensive white tone
Recommendation:See above for products and advice
Apply two thin coats of the same colour using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemApply two thin coats using a roller or brush.
Please always trial apply!
View RapidPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemHighly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A lightly tinted colour
Recommendation:See above for products and advice
Choose from an endless selection of colours. Apply two thin coats using a brush or roller.
Please always trial apply!
View ProductChoose from a selection of colours. Apply two thin coats of Oil Stain using a brush or roller.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:An intensive colour
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:No preference, I just want the best protection possible!
Recommendation:See above for products and advice
Always apply thinly to this wood type!
Apply two clear coats thinly using a roller or brush.
Please always trial apply!
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
For the first coat, apply 1 coat of Oil Stain (with 6631 Hardener) very thinly using a brush or roller, and rub into the wood with a white pad.
For the second top coat, apply Polyx-Oil Express 3332 Clear Satin (with 6632 Hardener) for best results.
Please always trial apply!
4 hours with 6631 Hardener
View Oil StainView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
For the second top coat, apply Polyx-Oil Express 3332 Clear Satin (with 6632 Hardener) using a brush or roller for best results.
Please always trial apply!
1-2 hours with 6632 Hardener
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency, use Osmo Maintenance Oil (not applicable for surfaces finished with Osmo 2K Wood Oil). This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Requirement:A colour that will protect the wood
Recommendation:See above for products and advice
It is mandatory that you always apply thinly to this wood type!
Apply two thin coats using a roller or brush.
Please always trial apply!
View ProductHighly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
For more information and expert advice on the best product to use for your project, contact the Osmo Technical Team today.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Furniture and General Joinery
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Apply two thin coats using a brush or using a spray coating method.
Please always trial apply!
Please note, this product is for lighter coloured wood species only!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
Light coloured wood stays light coloured, without the permanent wet effect.
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before allowing the surface to dry.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
For the intensive cleaning of stubborn scuff marks, and refreshing the sheen on Osmo Door-Oil 3060 Clear Satin, use clear Osmo Liquid Wax Cleaner. Avoid using Liquid Wax Cleaner over Osmo Door-Oil 3033 Raw Matt as it will appear more shiny.
Simply re-apply one coat onto the clean and dry surface when slight signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to preserve the wood’s natural light colour
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Apply two thin coats using a brush or using a spray coating method.
Please always trial apply!
Please note, this product is for lighter coloured wood species only!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Recommendation:See above for products and advice
Recommended for light coloured wood species only. UV-resistance for interior use is not possible with dark-coloured wood species.
Apply two coats thinly using a brush or using a spray coating method.
Please always trial apply!
Please note, durability is stronger when applyingOsmo Door-Oil.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust cleaning. Damp cleaning using Osmo Anti-Bac Wood Cleaner.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A UV-resistant finish
Recommendation:See above for products and advice
Apply two thin coats using a brush, roller or hand pad.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:No preference or regulations to meet. I just want the best protection possible!
Recommendation:See above for products and advice
Apply two coats thinly using a roller or brush.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Recommendation:See above for products and advice
MUST APPLY THINLY!
Apply two thin coats using a roller or brush.
Please always trial apply!
MUST APPLY THINLY!
Apply two thin coats using a brush or using a spray coating method.
Please always trial apply!
Please note, this product is only suitable for lighter coloured wood species, and durability is stronger with Option 1: Wood Wax Finish.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
MUST APPLY THINLY!
Apply two thin coats using a roller or brush.
Please always trial apply!
MUST APPLY THINLY!
Apply two thin coats using a brush or using a spray coating method.
Please always trial apply!
Please note, this product is only suitable for lighter coloured wood species, and durability is stronger with Option 1: Wood Wax Finish.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A colour that will protect the wood
Recommendation:See above for products and advice
Recommended for light coloured wood species only. UV-resistance for interior use is not possible with dark-coloured wood species.
Apply two coats thinly using a brush or using a spray coating method.
Please always trial apply!
Please note, durability is stronger when applyingOsmo Door-Oil.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A UV-resistant finish
Recommendation:See above for products and advice
Apply two thin coats using a brush, roller or hand pad.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Surface cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Walls and Ceilings
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:No preference or regulations to meet. I just want the best protection possible!
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Attribute:High quality finish
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
View RapidApply two thin coats using a roller or brush.
Please always trial apply!
View ExpressThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil Rapid are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Attribute:Quick drying finish
Recommendation:See above for products and advice
Apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping using a dust mop and damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Attribute:Solvent/VOC free finish
Recommendation:See above for products and advice
For Lighter Coloured Woods Only!
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
View ProductFor Lighter Coloured Woods Only!
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
View ProductPlease Note: This product should only be used by experienced users of Osmo products. The Rapid version of 3044 Raw is only available in store from an Osmo Supplier that has a Tinting System.
Tinting SystemDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
If the oiled surface remains light in colour yet there is a reduction in water repellency, refresh the surface with Osmo Maintenance Oil 3079 Clear Matt. Before using Osmo Maintenance Oil 3079, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil 3079 can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear become visible, and providing the surface does not become completely bare, simply re-apply one thin coat onto the clean and dry surface. Avoid applying Polyx®-Oil Effect Raw to bare wood surfaces that have become dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to preserve the wood’s natural light colour
Recommendation:See above for products and advice
Apply two thin coats of 3040 White using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemApply two thin coats using a roller or brush.
Please always trial apply!
View RapidPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx®-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Light white tone
Recommendation:See above for products and advice
Apply one thin coat of 3111 White using a roller or brush.
Please always trial apply!
View ProductApply one thin top coat of 3040 White using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx®-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Mid white tone
Recommendation:See above for products and advice
Apply two thin coats of 3111 White using a roller or brush.
Please always trial apply!
View ProductApply two thin coats of Oil Stain 3501 White using a brush or roller, and rub into the wood with a white pad.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A white colour
Tone:Intensive white tone
Recommendation:See above for products and advice
Apply two thin coats of the same colour using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemApply two thin coats using a roller or brush.
Please always trial apply!
View RapidPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx®-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:A lightly tinted colour
Recommendation:See above for products and advice
Choose from an endless selection of colours. Apply two thin coats using a brush or roller.
Please always trial apply!
View ProductChoose from a selection of colours. Apply two thin coats of Oil Stain using a brush or roller.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood
Colour:An intensive colour
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:No preference, I just want the best protection possible!
Recommendation:See above for products and advice
Always apply thinly to this wood type!
Apply two clear coats thinly using a roller or brush.
Please always trial apply!
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive spot cleaning of scuff marks and refreshing using Osmo Liquid Wax Cleaner.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
For the first coat/s, apply 1-2 thin coats of Oil Stain to achieve your desired intensity using a brush or roller, and rub into the wood with a white pad.
For the second top coat, apply 1 coat of Polyx-Oil Express with Hardener in a Satin finish.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive spot cleaning of scuff marks and refreshing using Osmo Liquid Wax Cleaner.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Requirement:A colour that will protect the wood
Recommendation:See above for products and advice
It is mandatory that you always apply thinly to this wood type!
Apply two thin coats using a roller or brush.
Please always trial apply!
View ProductDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
For more information and expert advice on the best product to use for your project, contact the Osmo Technical Team today.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Skirting Boards
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
Apply one coat generously on all sides if possible, removing any excess before leaving to dry.
Especially recommended for softwoods.
Please always trial apply!
Apply the first coat thinly using a brush.
Apply the second coat using a cloth for best results.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Wood Condition:Clean and ready for application
Requirement:A finish to enhance the wood’s grain and natural characteristics / No preference, I just want the best protection possible!
Recommendation:See above for products and advice
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
Apply one coat generously on all sides if possible, removing any excess before leaving to dry.
Especially recommended for softwoods.
Please always trial apply!
Apply the first coat thinly using a brush.
Apply the second coat using a cloth for best results.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Wood Condition:Clean and ready for application
Requirement:A finish to preserve the wood’s natural light colour
Recommendation:See above for products and advice
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
Apply one coat generously on all sides if possible, removing any excess before leaving to dry.
Especially recommended for softwoods.
Please always trial apply!
The wood's grain and natural characteristics are lightly white tinted transparently.
Apply the first coat thinly using a brush.
Apply the second coat using a cloth for best results.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Wood Condition:Clean and ready for application
Requirement:A colour that will protect the wood
Colour:A white colour
Recommendation:See above for products and advice
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
Apply one coat generously on all sides if possible, removing any excess before leaving to dry.
Especially recommended for softwoods.
Please always trial apply!
Apply thinly using a roller or brush.
Please always trial apply!
Apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
Please note, you may have difficulty with spot repairs using this product.
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Wood Condition:Clean and ready for application
Requirement:A colour that will protect the wood
Colour:Other colour
Recommendation:See above for products and advice
Effectively remove black spots and staining from wood without sanding – depending on the severity of the staining.
Spray evenly onto the spot until the surface is completely covered. Then allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat this process and wipe clean.
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
Apply one coat generously on all sides if possible, removing any excess before leaving to dry.
Especially recommended for softwoods.
Please always trial apply!
Apply the first coat thinly using a brush.
Apply the second coat using a cloth for best results.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Wood Condition:Black staining visible
Requirement:A finish to enhance the wood’s grain and natural characteristics / No preference, I just want the best protection possible!
Recommendation:See above for products and advice
Effectively remove black spots and staining from wood without sanding – depending on the severity of the staining.
Spray evenly onto the spot until the surface is completely covered. Then allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat this process and wipe clean.
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
Apply one coat generously on all sides if possible, removing any excess before leaving to dry.
Especially recommended for softwoods.
Please always trial apply!
Apply the first coat thinly using a brush.
Apply the second coat using a cloth for best results.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Wood Condition:Black staining visible
Requirement:A finish to preserve the wood’s natural light colour
Recommendation:See above for products and advice
Effectively remove black spots and staining from wood without sanding – depending on the severity of the staining.
Spray evenly onto the spot until the surface is completely covered. Then allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat this process and wipe clean.
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
Apply one coat generously on all sides if possible, removing any excess before leaving to dry.
Especially recommended for softwoods.
Please always trial apply!
The wood's grain and natural characteristics are lightly white tinted transparently.
Apply the first coat thinly using a brush.
Apply the second coat using a cloth for best results.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Wood Condition:Black staining visible
Requirement:A colour that will protect the wood
Colour:A white colour
Recommendation:See above for products and advice
Effectively remove black spots and staining from wood without sanding – depending on the severity of the staining.
Spray evenly onto the spot until the surface is completely covered. Then allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat this process and wipe clean.
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
Apply one coat generously on all sides if possible, removing any excess before leaving to dry.
Especially recommended for softwoods.
Please always trial apply!
Apply thinly using a roller or brush.
Please always trial apply!
Apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
Please note, you may have difficulty with spot repairs using this product.
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Wood Condition:Black staining visible
Requirement:A colour that will protect the wood
Colour:Other colour
Recommendation:See above for products and advice
Apply two thin coats with a roller or a brush.
Please always trial apply!
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
Please note, you may have difficulty with spot repairs using this product.
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping using a dust mop and damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Recommendation:See above for products and advice
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
MUST APPLY THINLY!
Apply one coat on all sides if possible, removing any excess before leaving to dry.
Please always trial apply!
MUST APPLY THINLY!
Apply the first coat thinly using a brush.
Apply the second coat using a cloth for best results.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Wood Condition:Clean and ready for application
Requirement:A finish to enhance the wood’s grain and natural characteristics / No preference, I just want the best protection possible!
Recommendation:See above for products and advice
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
MUST APPLY THINLY!
Apply one coat on all sides if possible, removing any excess before leaving to dry.
Please always trial apply!
MUST APPLY THINLY!
The wood's grain and natural characteristics are lightly white tinted transparently.
Apply thinly using a roller or brush.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Wood Condition:Clean and ready for application
Requirement:A colour that will protect the wood
Colour:A white colour
Recommendation:See above for products and advice
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
MUST APPLY THINLY!
Apply one coat on all sides if possible, removing any excess before leaving to dry.
Please always trial apply!
MUST APPLY THINLY!
Apply thinly using a roller or brush.
Please always trial apply!
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Wood Condition:Clean and ready for application
Requirement:A colour that will protect the wood
Colour:Other colour
Recommendation:See above for products and advice
Effectively remove black spots and staining from wood without sanding – depending on the severity of the staining.
Spray evenly onto the spot until the surface is completely covered. Then allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat this process and wipe clean.
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
MUST APPLY THINLY!
Apply one coat on all sides if possible, removing any excess before leaving to dry.
Please always trial apply!
MUST APPLY THINLY!
Apply the first coat thinly using a brush.
Apply the second coat using a cloth for best results.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Wood Condition:Black staining visible
Requirement:A finish to enhance the wood’s grain and natural characteristics / No preference, I just want the best protection possible!
Recommendation:See above for products and advice
Effectively remove black spots and staining from wood without sanding – depending on the severity of the staining.
Spray evenly onto the spot until the surface is completely covered. Then allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat this process and wipe clean.
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
MUST APPLY THINLY!
Apply one coat on all sides if possible, removing any excess before leaving to dry.
Please always trial apply!
MUST APPLY THINLY!
The wood's grain and natural characteristics are lightly white tinted transparently.
Apply thinly using a roller or brush.
Please always trial apply!
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat of TopOil onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Wood Condition:Black staining visible
Requirement:A colour that will protect the wood
Colour:A white colour
Recommendation:See above for products and advice
Effectively remove black spots and staining from wood without sanding – depending on the severity of the staining.
Spray evenly onto the spot until the surface is completely covered. Then allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat this process and wipe clean.
We recommend sanding your wooden surface using coarse sandpaper to grade P120-150.
For additional advice about sanding, pleasecontact the Osmo Advice Teamtoday.
MUST APPLY THINLY!
Apply one coat on all sides if possible, removing any excess before leaving to dry.
Please always trial apply!
MUST APPLY THINLY!
Apply thinly using a roller or brush.
Please always trial apply!
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping with Dust Mop, or damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Kitchen Worktops, Chopping Boards and Dining Tables
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Wood Condition:Black staining visible
Requirement:A colour that will protect the wood
Colour:Other colour
Recommendation:See above for products and advice
Available finishes include Satin, Glossy, Matt, and Semi-Matt.
Apply two thin coats using a roller or brush.
Please always trial apply!
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive spot cleaning of scuff marks and refreshing using Osmo Liquid Wax Cleaner.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics with EN71.3 accreditation
Attribute:High quality finish
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
View RapidApply two thin coats using a roller or brush.
Please always trial apply!
View ExpressThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive spot cleaning of scuff marks and refreshing using Osmo Liquid Wax Cleaner.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics with EN71.3 accreditation
Attribute:Quick drying finish
Recommendation:See above for products and advice
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Highly effective regular cleaning, while killing bacteria and viruses.
Nourishes and maintains protected wood surfaces without wear of treatment.
Available in a ready-to-use 500ml spray and 5L container.
Dust mopping using a dust mop and damp cleaning using Osmo Anti-Bac Wood Cleaner.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to enhance the wood’s grain and natural characteristics with EN71.3 accreditation
Attribute:Solvent/VOC free finish
Recommendation:See above for products and advice
For Lighter Coloured Woods Only!
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
View ProductFor Lighter Coloured Woods Only!
Apply two thin coats using a roller or brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
View ProductPlease Note: This product should only be used by experienced users of Osmo products. The Rapid version of 3044 Raw is only available in store from an Osmo Supplier that has a Tinting System.
Tinting SystemDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive spot cleaning of scuff marks and refreshing using Osmo Liquid Wax Cleaner.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A finish to preserve the wood’s natural light colour with EN71.3 accreditation
Recommendation:See above for products and advice
Apply two thin coats of 3040 White using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemApply two thin coats using a roller or brush.
Please always trial apply!
View RapidPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx®-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood with EN71.3 accreditation
Colour:A white colour
Tone:Light white tone
Recommendation:See above for products and advice
Apply one thin coat of 3111 White using a roller or brush.
Please always trial apply!
View ProductApply one thin top coat of 3040 White using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx®-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood with EN71.3 accreditation
Colour:A white colour
Tone:Mid white tone
Recommendation:See above for products and advice
Apply two thin coats of 3111 White using a roller or brush.
Please always trial apply!
View ProductApply two thin coats of Oil Stain 3501 White using a brush or roller, and rub into the wood with a white pad.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood with EN71.3 accreditation
Colour:A white colour
Tone:Intensive white tone
Recommendation:See above for products and advice
Apply two thin coats of the same colour using a roller or brush.
Please always trial apply!
View ProductPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemApply two thin coats using a roller or brush.
Please always trial apply!
View RapidPlease Note: This product is also available in a Gloss, Semi-Matt, and Matt finish. They can be mixed in store via an Osmo Supplier that has a Tinting System.
Tinting SystemDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx®-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood with EN71.3 accreditation
Colour:A lightly tinted colour
Recommendation:See above for products and advice
Choose from an endless selection of colours. Apply two thin coats using a brush or roller.
Please always trial apply!
View ProductChoose from a selection of colours. Apply two thin coats of Oil Stain using a brush or roller.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:A colour that will protect the wood with EN71.3 accreditation
Colour:An intensive colour
Recommendation:See above for products and advice
Apply two thin coats using a roller or brush.
Please always trial apply!
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx®-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Oak, Pine, Ash, Beech, Birch, Spruce, Larch, or Other highly porous and naturally lightly coloured wood species of domestic origin
Requirement:No preference, I just want the best protection possible with EN71.3 accreditation!
Recommendation:See above for products and advice
Always apply thinly to this wood type!
Apply two clear coats thinly using a roller or brush.
Please always trial apply!
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
For the first coat/s, apply 1-2 thin coats of Oil Stain to achieve your desired intensity using a brush or roller, and rub into the wood with a white pad.
For the second top coat, apply 1 coat of Polyx-Oil Express with Hardener in a Satin finish.
Please always trial apply!
4 hours with Hardener
12 hours without Hardener
This is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Apply two thin coats using a roller or brush.
Please always trial apply!
View ExpressView HardenerThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Only apply one coat thinly using the Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper.
On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints.
Wait approx. 20-40 minutes for the oil to penetrate the wood.
Afterwards, buff oil into the wood and even out the surface with a single disc machine and a white or beige pad.
Please always trial apply!
View ProductThis is a professional product which requires specialist knowledge and/or tools before using. For expert advice,contact the Osmo Technical Team.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Wood surfaces treated with Polyx®-Oil are highly repellent and easy to maintain. Remove debris with the Osmo green Dust-Mop from the Mop Cleaning Kit for Floors, or use a broom or a vacuum cleaner. Damp mop floors using diluted Osmo Wash and Care and the Osmo Micro-Mop Plush from the Mop Cleaning Kit for Floors. Avoid saturating the surface with water. For the convenient cleaning of floors use Osmo Spray-Mop. For furniture or small areas, use Osmo Anti-Bac Wood Cleaner and Osmo Easy Pads.
For spot cleaning stubborn scuff marks, or occasionally refreshing satin or gloss Polyx®-Oils use Osmo Liquid Wax Cleaner. Alternatively, Osmo Maintenance Oils can be used to occasionally refresh most Polyx®-Oil sheen levels, including matt. Ensure surfaces are appropriately cleaned before thinly applying Osmo Maintenance Oils.
Simply re-apply one coat onto the appropriately cleaned and dried surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Mahogany, Teak, Cedar, Iroko, Walnut (South American or African), Rosewood, Wenge, or Other wood species of tropical origin
Requirement:A colour that will protect the wood
Recommendation:See above for products and advice
It is mandatory that you always apply thinly to this wood type!
Apply two thin coats using a roller or brush.
Please always trial apply!
View ProductDamp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
For more information and expert advice on the best product to use for your project, contact the Osmo Technical Team today.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using diluted Osmo Wash and Care and the Micro-Mop plush from the Osmo Mop Cleaning Kit for Floors. Alternatively use the convenient Osmo Spray-Mop.
For satin sheen surfaces that have dulled slightly, refresh the surface with Osmo Liquid Wax Cleaner. Osmo Liquid Wax Cleaner can also help to remove stubborn shoe scuff marks for example. If the treated surface has retained colour yet there is a reduction in water repellency use Osmo Maintenance Oil. This is important to ensure the top coat remains optimal – especially in very busy areas like a door entrance for example. Osmo Maintenance Oil is thinner than regular Polyx®-Oil so can be used more regularly without adding too much wax and oil. Before using Osmo Maintenance Oil, damp clean the surface using diluted Osmo Wash and Care, or alternatively Osmo Anti-Bac Wood Cleaner and allow to fully dry. For small areas Osmo Maintenance Oil can be applied thinly with a lint free cloth or white pad. Remove excess product. Allow for good ventilation while drying. A small trial is highly recommended first.
When slight signs of wear to the clear (or white) top coat become visible, or if the surface is looking tired, simply re-apply one thin coat of the appropriate Polyx®-Oil top coat onto the clean and dry surface. Avoid applying the top coat to areas that have lost colour, or have become bare and dirty. Bare, dirty surfaces could appear more rich and dark following the application of the oil finish and may require more attention. A small trial is highly recommended first.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Children’s Toys and Furniture
Wood Species:Maple, Acacia, Elm, Sycamore, Smoked Oak, Larch (Siberian), Walnut (English or American), Cherry (English or American), or Other wood species which requires either specialist knowledge, tools or instruction
Requirement:A finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
Apply 2 coats thinly using a roller or a brush, then remove excess with a pad or lint free cloth. This is very important to avoid slipperiness with this product.
Please always trial apply!
Please note, this product is not suitable for sealed or inabsorbent surfaces, such as porcelain.
Damp clean using diluted Osmo Wash and Care.
Avoid saturating the surface with water.
Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.
Refresh clean, dry surfaces using a little amount of Osmo Concrete Oil 610 applied with a lint free cloth.
Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Interior
Surface:Non Wooden Surfaces
Wood Species:Porous Concrete, Unsealed Stone, Ceramic Tiles (non-glazed), or Other Unsealed Porous Surfaces
Recommendation:See above for products and advice
Apply thinly two coats using a brush or roller.
Please always trial apply!
Recoating is usually necessary each year or when signs of wear becomes visible.
Special end grain sealer for cladding, decking and other exposed end grain applications.
Apply two coats generously using a flat brush or lint-free cloth. Please read instructions on the product page for full application overview.
Recommended for all wood species after the weathering process and application of Osmo Oils.
View Product
Highly effective regular cleaning of dirt and stains.
Dilute Decking Cleaner to clean water 1:25, up to max 1:1 ratio.
Available in 1L and 5L sizes.
Damp cleaning with Osmo Anti-Bac Wood Cleaner or diluted Osmo Decking Cleaner.
If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Simply re-apply one thin coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Exterior
Surface:Cladding, Fencing, Gates, and Garden Buildings
Wood Species:Oak, Ash, Beech, Birch, or Other medium to high porosity and naturally light coloured wood species of domestic origin
Wood Condition:New or recently sanded wood
Requirement:A UV-resistant finish to enhance the wood’s grain and natural characteristics
Recommendation:See above for products and advice
For Lighter Coloured Woods Only!
Apply two thin coats of 429 Natural using a brush, removing any excess and white pigments from the surface before leaving to dry.
Please always trial apply!
Applications onto oak provides the best results.
Special end grain sealer for cladding, decking and other exposed end grain applications.
Apply two coats generously using a flat brush or lint-free cloth. Please read instructions on the product page for full application overview.
Recommended for all wood species after the weathering process and application of Osmo Oils.
View ProductHighly effective regular cleaning of dirt and stains.
Dilute Decking Cleaner to clean water 1:25, up to max 1:1 ratio.
Available in 1L and 5L sizes.
Damp cleaning with Osmo Anti-Bac Wood Cleaner or diluted Osmo Decking Cleaner.
If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Simply re-apply one thin coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Exterior
Surface:Cladding, Fencing, Gates, and Garden Buildings
Wood Species:Oak, Ash, Beech, Birch, or Other medium to high porosity and naturally light coloured wood species of domestic origin
Wood Condition:New or recently sanded wood
Requirement:A UV-resistant finish to preserve the wood’s natural light colour
Recommendation:See above for products and advice
Choose from a selection of lightly tinted colours.
Apply thinly two coats using a brush, removing any excess before leaving to dry.
Please always trial apply!
Special end grain sealer for cladding, decking and other exposed end grain applications.
Apply two coats generously using a flat brush or lint-free cloth. Please read instructions on the product page for full application overview.
Recommended for all wood species after the weathering process and application of Osmo Oils.
View ProductHighly effective regular cleaning of dirt and stains.
Dilute Decking Cleaner to clean water 1:25, up to max 1:1 ratio.
Available in 1L and 5L sizes.
Damp cleaning with Osmo Anti-Bac Wood Cleaner or diluted Osmo Decking Cleaner.
If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Simply re-apply one thin coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Exterior
Surface:Cladding, Fencing, Gates, and Garden Buildings
Wood Species:Oak, Ash, Beech, Birch, or Other medium to high porosity and naturally light coloured wood species of domestic origin
Wood Condition:New or recently sanded wood
Requirement:A UV-resistant colour that will protect the wood
Colour:A lightly tinted colour (wood grain and character remains visible and highly influences the final result)
Recommendation:See above for products and advice
Choose from an endless selection of transparent colours in a satin finish.
Apply thinly two coats using a roller or brush.
Please always trial apply!
Please Note: This product is also available in a Matt finish. It can be mixed in store via an Osmo Supplier that has a Tinting System.
Additionally, RAL, NCS and BS colours are also available via the in store Tinting System.
Special end grain sealer for cladding, decking and other exposed end grain applications.
Apply two coats generously using a flat brush or lint-free cloth. Please read instructions on the product page for full application overview.
Recommended for all wood species after the weathering process and application of Osmo Oils.
View ProductHighly effective regular cleaning of dirt and stains.
Dilute Decking Cleaner to clean water 1:25, up to max 1:1 ratio.
Available in 1L and 5L sizes.
Damp cleaning with Osmo Anti-Bac Wood Cleaner or diluted Osmo Decking Cleaner.
If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.
Simply re-apply one thin coat onto the clean and dry surface when signs of wear become visible.
For additional product and buying advice, reference this page along with your recommendations above in your nearest Osmo Supplier store, or show to a member of the Osmo Team. Below shows your Osmo Recommends journey:
Project:Exterior
Surface:Cladding, Fencing, Gates, and Garden Buildings
Wood Species:Oak, Ash, Beech, Birch, or Other medium to high porosity and naturally light coloured wood species of domestic origin
Wood Condition:New or recently sanded wood
Requirement:A UV-resistant colour that will protect the wood
Colour:An intensive transparent colour (wood grain and character remains visible)
Recommendation:See above for products and advice
Choose from 120 colours from the Elements® range in a satin finish.
Apply thinly two coats using a roller or brush.
Please always trial apply!
Please Note: This product is mixed in store via an Osmo Supplier that has a Tinting System.
Additionally, RAL, NCS and BS colours are also available.
Special end grain sealer for cladding, decking and other exposed end grain applications.
Apply two coats generously using a flat brush or lint-free cloth. Please read instructions on the product page for full application overview.
Recommended for all wood species after the weathering process and application of Osmo Oils.
View ProductHighly effective regular cleaning of dirt and stains.
Dilute Decking Cleaner to clean water 1:25, up to max 1:1 ratio.
Available in 1L and 5L sizes.
Damp cleaning with Osmo Anti-Bac Wood Cleaner or diluted Osmo Decking Cleaner.
